The TubBuddy with Tilt, model SB2T, is a caster shower commode designed for use by individuals with lower extremity, mobility or severe physical disabilities or spinal cord injury. This system allows a caregiver to transfer an individual over the edge of a bathtub for ease in showering or to be rolled over a standard or elongated toilet when used as a commode. For transfer into or out of a shower enclosure, see the ShowerBuddy (see separate entry). The chair can also be used a shower chair for roll-in showers. The TubBuddy features a chair with a cut-out commode seat on a base with four casters and a transfer track with two rails. One end of the transfer track is placed in the bathtub, and its four feet are securely anchored in the tub with rails extending out of the tub over any up to 7.1 inches high. The wheeled base of the chair connects to the transfer track, and the seat detaches from the base and slides along the rails into the bathtub area. Once over the bathtub, the seat can rotate 360 degrees. The chair, including seat, back and footrests, reclines up to 30 degrees. Other features include a commode system, removable foldaway arms, footrest, and lap and chest belts. The unit is corrosion- and mold-resistant and can be assembled without tools. OPTIONS: Body point belt; seat cushion overlay; headrest. FRAME: (WxD): The wheeled base is 22.5 x 31.9 inches, and the total length of the wheeled base and the transfer track is 49.8 inches. The maximum clearance of the transfer track is 25.22 inches. SEAT (WxD): The seat is 18 x 16.5 inches. The back is 18.7 inches wide and 21.5 inches high. The arms are 18 inches wide inside and 22.5 inches outside. The floor-to-seat height adjusts from 24.8 to 28.8 inches. CASTERS: 5-inch locking casters. CAPACITY: 300 pounds. WARRANTY: 2-year limited warranty.