AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
CUSTOM ADAPTATION PURPOSE: To enable an individual with use of one hand to staple and clip documents. An A-4 sized document tray with edges on three sides was fabricated from rectangular aluminum sheet. A cutout in the top left corner enables the user to staple or paper clip the document. The tray can also be used to rubbber band groups of documents. The rubber band is hooked over the right corner of the tray and then hooked over the left side. The papers and the rubber band are lifted off the tray simultaneously, banding the papers. The tray is equipped with a custom-designed top opening clamp to secure the tray to a counter or workbench. The clamp has a flat piece of steel at the bottom with a solid piece at 90 degrees that slides into a square tube at the top. The solid steel piece has a threaded hole enabling the user to fit a screw and turn it to draw up the bottom piece. TITLE: Office Assistance. JOURNAL: TAD Journal. REF: Vol 22 no 1, Autumn 2002: p 12-13. PAGES (including cover): 3 2002.
print close directions