Ableware's Wheelchair Cup Holder holds a drink securely on wheelchair frames, bed rails, and other tubular frames. The plastic cup holder is slotted on two sides to hold a cup with handles and is accessible to left or right-handed people. It can also hold a glass, can or bottle. The rugged plastic clamp has a large easy-to-tighten lever knob. It is designed for people with fine motors and grasping disabilities.
The Ableware Bedside Beverage Holder by Maddak is a cup holder for individuals confined to beds and/or wheelchairs who are do not have the ability of holding a cup, bottle, or mug in their hand. The Bedside Beverage Holder clamps to most tubes on beds or wheelchairs. It is easy to attach, adjust, and relocate. It holds bottles and mugs with handles and position drink within reach.
The ADALAP Base Unit is designed to provide carrying capability for individuals with mobility or lower impairment disabilities who use a wheelchair. The ADALAP slides right under the seat cushion. The lightweight anodized aluminum base is durable and easy to use. No nuts or bolts, just sturdy, adjustable convenience. The ADALAP base won't rust so it can be used while out in the rain.
The Arthro Thumbs-Up Replacement Lid is functional and lightweight for people who have decreased grip strength, wrist pain, hand deformities, or need to keep the wrist in a neutral position. The ergonomic design increases leverage of the hand and aids in raising the cup to the lips without wrist motion. The thumbs-on grip reduces the possibility of spilling due to trembling. The cup is double-walled to protect hands from heat or cold.
The Bedside Beverage Holder is a cup, can, or bottle hoder designed to clamp onto bed rails. This unit features a flexible holder arm and an adjustable clamp. DIMENSIONS: The arm is 11 inches long and the clamp adjusts to fit rails from 0.75 to 1 inch in diameter.
The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p
This cup holder is made of molded plastic and has a mounting lug for attachment to a wheelchair. Left or right attachment, for desk or full length arms. Easily removable.
Cup Holder, model HA-4263, is a cup or glass holder designed for use by individuals with grasping or upper extremity disabilities or arthritis. This cup holder has two large handles to assist with control, enabling the user to hold the cup in the correct position for drinking. WEIGHT: 55 grams.
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to drink independently. This cup holder is made using a flexible gooseneck microphone stand with fittings at each end, a machined clamp that fits the wheelchair armrest, a piece of black PVC drain collar, and fence wire. The PVC collar has a notch cut into the side of it to hold a thermal coffee cup, and a wire cage
was added below to hold most juice bottles and soda cans. A piece of fencing wire is placed inside the go
DO IT YOURSELF ENTRY --- PURPOSE: To create an easy way to pick up various size cups or bottles. Cut a piece of 4-inch diameter PVC pipe and split it on one side so the hoop can expand and fit over a larger container. Screw a wooden handle into the PVC pipe directly opposite the split. MATERIALS: Wooden handle; 4-inch diameter PVC pipe; wood screws. TOOLS: Bandsaw, screwdriver. SKILLS REQUIRED: Carpentry. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SITE: http://www.mdausa.
CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove
The Dycem Non-Slip Cup Holder is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. Made of Dycem non-slip material, this shallow holder fits snugly on the bottom of most standard mugs and glasses. Once on the cup, the holder prevents unwanted movement and spillage. The holder can be removed for washing in warm, soapy water. DIMENSIONS: 3.5 x 0.75 inches. COLOR: Blue.
The Easy Caddy, model 14A108A, is a carrying tray and cup holder designed for use by individuals who use walkers. This tray clips in place on most folding wheeled walkers. It features a large compartment and a smaller shallower section. The top tray is recessed to hold items such as a dinner plate in place. The contoured sides have no dirt traps. A cup holder helps prevent spillage. The tray is made from durable plastic, supports up to 4.4 pounds, and can be cleaned by hand or in a domestic dish
The ezEnabler Tray and Cup Holder Accessory is designed to provide carrying capability and independence for individuals with mobility or lower impairment disabilities who use wheelchairs and walkers. The table top hook and cup-holder is lightweight, durable, portable, and gives the user an extra arm or hand to assist them with their everyday tasks and hobbies at home, school, stores, restaurants, theaters, etc.
Flexistand® is a unique overbed bedside table that holds laptops, books, or dinner in bed. Includes built-in cup holder. It can be used by individuals with limited mobility, or who have other physical disabilities and paralysis, including multiple sclerosis, cerebral palsy, stroke, and spinal injuries.
The Freedom Large Cup Holder is a cup holder designed for use by individuals with upper extremity, neurological, or mobility disabilities. This collapsible, weighted drinkholder has an integral base with a cork bottom to absorb moisture. A patented locking leg prevents the drink holder from collapsing while in use. The cup holder adjusts to hold 16- to 46-ounce glasses, mugs, cans or bottles. This cupholder is designed not to move or tip over when hit or bumped, making it useful for wheelchair t
The Freedom Standard Cup Holder is a cup holder designed for use by individuals with upper extremity, neurological, or mobility disabilities. This collapsible, weighted drinkholder has an integral base with a cork bottom to absorb moisture. A patented locking leg prevents the drink holder from collapsing while in use. The cup holder adjusts to hold 6- to 16-ounce glasses, mugs, cans, or bottles. This cupholder is designed not to move or tip over when hit or bumped, making it useful for wheelchai
Handi-Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities. The unit attaches to tubular areas of wheelchairs, walkers, and scooters to carry drinks and other items. The unit is removable without tools or fasteners from its mounting to allow accessibility for transfers. This rugged drink holder mounts securely at convenient locations on swing away footrests and other tubular areas. OPTIONS: Additional mounts and custom modifications. DIMENSIONS: Models a
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Holders for mugs and glasses that a person with weak or stiff hands can lift either resting on the palm or between thumb and index finger on the side of the hand. Provides pattern and instructions for constructing two holders, one for tall glasses, the other for shorter wider containers such as mugs. They are both made with a wood base or platform and wood upright, to which is fastened a piece cut from a plastic drainpipe; this part wraps around the gl
The Lotion Applicator is designed for users with limited upper extremity strength and/or range of motion. The device is intended to assist with rubbing or spreading medications, lotions, suntan oils, and sports creams on out-of-the-way areas with ease. The 12-inch built-up ribbed handle has a thumb rest and is angled in two spots for maximum motion. The sponge can be removed when worn and replaced with a new one.
Mother's 3rd Arm is a flexible, portable cup or baby bottle holder designed for use by children and adults with upper extremity disabilities. This device consists of a large cylinder affixed to a long flexible neck with a large clamp at the base. The adjustable clamp permits the device to be secured to the edges of tables or desks, the back of automobile seats, bed rails, or to the tubular frame of a stroller, wheelchair, or high chair. The cup or baby bottle is placed in the cylinder and the ne
The Muggi is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. The device is designed to be a handy carrier for hot and cold drinks. The user can carry up to four mugs in the holder, or maybe two mugs and some cake or biscuits. The Muggi is lightweight but tough. It has rubber non-slip feet and is dishwasher and microwave safe.
The Quick Caddy Beverage Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs or walkers. This device consists of a strong stainless steel cage which mounts on any vertical or semi-vertical tube, rail, or pole using the attached flexible plastic mount with a hook-and-loop strap. The product comes with a foam "cozy" which securely holds soda cans or small water bottles. Without the cozy, the cage can carry larger 16-ounce glasses or larger water bo
The Quick Cage Water Bottle Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs, walkers or crutches. This stainless steel water bottle cage mounts to any vertical or horizontal tube, rail, or pole using an attached flexible plastic mount and a hook-and-loop strap. The unit includes a 21-ounce water bottle with the Twofish unlimited insignia.
The RoboCup is a cup, can or drink holder designed for use by people who use a walker, wheelchair or mobility scooter and other individuals with a disability that affects their ability to hold or grasp objects. This portable dual caddy can securely hold two drinks, two fishing poles, tools, gear and personal belongings such as a telephone, keys, glasses and flashlight. The unit attaches to wheelchairs, walkers, scooters, grab bars, hospital beds or golf carts using the integrated clamp. The Robo
The SpillNot is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. The device can be used for carrying mugs, glasses and small bowls. The non-slip coaster (included) can be removed and used to protect furniture; it also works as a jar opener. The SpillNot is made of a curved plastic body with a non-slip platform for cups or glasses, and a fabric handle.
The Stickey Cup Holder is a cup holder designed for use by individuals with fine motor or grasping disabilities. Designed to eliminate spills, this device features a suction cup bottom that holds tight to any flat, non-porous surface, and is easily removed when desired. The device secures cans, bottles, cups, tumblers, and containers of various sizes. OPTIONS: The cup holder is available for wholesale purchase with custom colors and logos. DIMENSIONS (HxW): 4 x 4.25 inches. WEIGHT: 5 ounces. CO
The Stress Less Drink Holder - 10 Pack is a set of drink holders designed for people who are blind or have low vision. It can be used in the home or office. This cup holder was created by a legally blind inventor to help himself and others prevent spilling beverages, and to live life more independently and with less frustrations.
The Sure Grip Cup Handle is an optional handle attachment that easily clips to the Sure Grip Cup which makes it possible for the user to hold the cup with little or no grasp. It is designed for people with grasping disabilities.
TheraSIP Swallowing Trainer is designed to provide a systematic swallowing exercise program which can be used in treatment and prescribed for in-room or in the home drills. It strives to increase the patients volitional swallow frequency and strength as well as to encourage a heightened, purposeful effort. Practice of single bolus swallows or continuous swallows can be provided. As a neuromuscular exercise program focuses on the specificity of the exercise and on the use of repetition to maximiz
The uDrink is a can, cup, or bottle holder designed for use by individuals with severe physical, neurological, upper extremity, or grasping disabilities or spinal cord injury. This device consists of a container holder with super grip non-slip strap liner and a stainless steel handle with a rubberized coating. The strap liner allows the strap to securely hold irregularly shaped items and containers, as well as containers covered in condensation. The handle is equipped with a slot through which t
This Universal Adaptive Drink Holder is designed for individuals who have limited or no grip, persons with disabilities that negatively affect their fine motor skills, a person with a traumatic brain injury, spinal cord injury, MS, cerebral palsy, someone who has arthritis or had a stroke. With the Universal Adaptive Drink Holder the user can drink independently. This product has a curved handle and can be adjusted to fit onto bottles, cans, cups & glasses of all different shapes, sizes and
Wheelchair Cup Holder is a plastic cup holder that has slotted on two sides to hold a cup with handles and is accessible to left or right-handed people. It can also hold a glass, can or bottle, including mugs with handles. The plastic clamp has a large easy-to-tighten lever knob. The clamp fits a 1 inch (2.5 centimeter) diameter tube and comes with a sleeve to reduce it to fit 7/8 inches (2.2 centimeter) tube frames.